Engineering would be a lot simpler if water was always arriving at the same rate.
It’s not.
The volume of wastewater that enters the residential system can vary throughout the day. Industrial and commercial facilities can have peak operating hours. The flow of stormwater can be affected by weather conditions. The demand for clean water also varies according to the application.
Image credit: romtecutilities.com
As a result, designing a pump station isn’t simply a matter of identifying one flow number and selecting equipment capable of meeting it. Engineers should be aware of possible conditions in which the equipment will be used.
Think about operating conditions Consider Operating Conditions, not just maximum capacity
It is obvious that maximum flow is a crucial factor however it is only one element of the functioning of an infrastructure. Imagine that a system for wastewater treatment was designed to handle a high maximum flow. In most cases that flow inflows are much lower. When this happens it is necessary for the station to perform as it should.
It brings up issues like the sizing and size of the pump as well as control of head condition, the best way to modify equipment when demand shifts.
When creating a system for pumping packages, it is important to consider the requirements for the specific site and not only the pump’s capacity.
The cycle of water that runs throughout the day
Throughout the life of the wastewater lift station influent conditions can change.
The station must have an effective control plan that permits the system to activate the pumps and then collect the wastewater. This requires design and dimensions of the structure, pumping gear, valves and pipes, as well as electrical components.
Design may include other site-specific considerations. Romtec Utilities can incorporate auxiliary equipment like grinder vaults and odor control equipment when required by the application. It is more cost-effective to design the station around a specific project rather than implementing general configurations for every wastewater site.
Stormwater can alter much more quickly
Stormwater is a different operating environment. During dry weather the stormwater lift station may not see much use. However, during extremely severe storms, the station could be able to witness an increase in the amount of activity. Stations can be a part of bigger flood control methods, detention and treatment plans, so the stormwater plan is an essential part of system design.
Romtec Utilities takes into consideration things like the flow rate needed, the head conditions, the system size as well as the requirements of the location and environmental aspects when designing these systems.
Stations serving commercial developments may appear very different from those designed for municipal stormwater applications.
The Head Conditions are important. along with Flow
Engineers need to be aware of where the water is heading and the resistance they have to overcome. Engineers need to be aware of where the water will go, and what kind of resistance they will have to overcome with the pumping system.
The head condition of the pump can be affected by a number of factors that include elevation changes as well as piping configurations and discharge conditions, and various other system aspects.
The relationship between head and flow is one reason simply choosing a pump based on a capacity rating isn’t enough. The technology of the pump and station configuration should match the specific hydraulic requirements of the entire application.
Create the station to meet the actual conditions it will experience
Romtec Utilities develops customized pumping systems for wastewater, stormwater cleaner water boosters, industrial, and many other uses. The process can include budgeting and design in the beginning and plans for complete systems, supply, documentation and startup testing, and commissioning.
The idea behind the design is quite simple pumping systems can’t spend their entire lives working under one set of convenient conditions.
They encounter changing flows, changing demands, as well as project-specific hydraulic needs. This reality must be taken into consideration when designing a station that is successful.